Professional Air Hose 100m | 10mm (3/8″) Bore × 17mm OD | Premium PU Pneumatic Line

Why This Hose Matters

When you're running compressed air across a workshop floor, through a production line, or around a fleet maintenance bay, the quality of your pneumatic hose directly impacts uptime, safety, and operational efficiency. This 100-metre professional air hose delivers consistent performance under pressure—literally.

Engineering & Construction

Premium polyurethane construction offers superior abrasion resistance compared to rubber or PVC alternatives. The material remains flexible in cold conditions yet resists degradation from oils, solvents, and UV exposure.

The 10mm (3/8″) internal bore strikes the optimal balance between airflow capacity and pressure drop over distance—critical when you're running 100 metres from compressor to point of use. Pair with quality 3/8″ BSP fittings for a leak-free, high-flow pneumatic system.

Performance Characteristics

• 10 bar working pressure – handles standard workshop compressor output with margin for pressure spikes
• 30 bar burst rating – 3:1 safety factor provides peace of mind in demanding applications
• Kink-resistant design – maintains airflow even when routed around tight corners or equipment
• Low-temperature flexibility – remains supple down to -20°C for outdoor or unheated workshop use
• Lightweight construction – easier to handle and install than traditional rubber hose

Typical Applications

• Workshop compressed air distribution and ring main installations
• Vehicle maintenance bays and MOT stations
• Manufacturing and production line pneumatic supply
• Agricultural and farm workshop air systems
• Construction site temporary air distribution
• Fleet maintenance and commercial vehicle workshops

Installation Guidance

For permanent installations, secure the hose at regular intervals using appropriate clips or cable ties. Avoid sharp bends with radius less than 10× the outer diameter (170mm minimum). When connecting to fittings, ensure the hose is cut square and pushed fully onto the barb before securing with hose clamps rated for pneumatic service.

Compatibility: Works with standard 10mm or 3/8″ pneumatic fittings including barbed tail pieces, quick-release couplers, and BSP threaded adaptors. For best results, use quality brass or stainless steel fittings rather than plastic alternatives.

What's in the Box

• 1 × 100-metre continuous length air hose (10mm ID × 17mm OD)
• Supplied on reel or coil for easy handling and storage

Fittings, couplers, and hose clamps sold separately – see our pneumatic fittings range.